INSERTEC Blog EN

Increased energy efficiency and fuel savings, emissions reduction, savings in acquisition cost, combustion gases reduction, regenerators and heat exchanger elimination...: In fact, Oxy-gas combustion appears to be an optimal situation; however, there are other considerations to conside

We are launching our campaign to raise awareness of the importance of recycling cans with the installation of 3 reverse vending machines at Mondragon University

In 2023, the validation phase of the new BAUXAL products begins with a battery of industrial tests on real equipment linings.

A few weeks ago, the Spanish government announced the approval of the Royal Decree on Packaging and Packaging Waste, an update of the regulations in force for more than 20 years that will have implications for the aluminium recycling sector

The heating process in a smelting plant is a key factor in optimisation. Combustion heating is the source of the process emissions to the atmosphere. Opting for a heating system with regenerative burners improves energy efficiency.

Choosing the right material, standardising processes, using automated systems...: how refractory can help foundries with energy savings.

Fast drying and high refractoriness: at the end of October, we lined a 1,2 ton steel ladle with FAST ON 90

Success story in the aluminium foundry sector with a 43% recovery of the waste heat stream from a heat treatment furnace.

INSESTRONG®, a trademarked material that is proving successful in a variety of applications and sectors.

The journey starts at ALUMINIUM 2022 and looks set to be a fascinating one: will you join us?

We are waiting for you next September 27, 28 and 29 at the Exhibition Center Düsseldorf (Germany). Stand: 6HO6

We know how important the metallurgical process is, the addition of alloying agents is the master formula. In different projects we have included an automatic alloying system with the capacity to alloy 15 tonnes of primary aluminium.

INSERTEC has again manufactured and installed a large prefabricated part (12 tonnes) in SIFCA technology to act as a partition wall between the main chamber and the charging shaft of a melting reverberatory furnace.

Decarbonisation, rising costs, electric vehicle boom, green hydrogen, circular economy: 5 energy trends that will shape the industry in the coming months (infographic)

Refractory castable based on alumina, FOSINCAST 90 presents special properties that allow a fast setting time thanks to its special bonding system without refractory cement. It also acts as a barrier against chemical attacks.

Paval's refining prototype has reached the Refinal production committed for the first sintering campaign that will take place during the month of August.

The proposed Rotary-hearth technology for solution and artificial ageing processes is operating successfully in most of automotive engine manufacturing plants.

On 27 April last, the 4th monitoring visit of LIFE BAUXAL II took place at the BEFESA-Valladolid facilities. After reviewing the scope and degree of execution of the project and the next actions, we saw the refinery prototype in operation.

Vibration is one of the most important points in the lining of coreless induction furnaces: the material has to be well compacted for maximum performance. Therefore, we have been working on an efficient, fast and reproducible vibration solution: AVS.

REFINAL agglomeration process establishes along with the sintering process the basis to obtain critical properties of the future BAUXAL grains such as density and porosity.