NEWSLETTER

The proposed Rotary-hearth technology for solution and artificial ageing processes is operating successfully in most of automotive engine manufacturing plants.

Insertec has registered the INSESTRONG trademark, a new technology based on the reinforcement of cement with metallic fibres.

Within the framework of dissemination and collaboration of the project, throughout the months of November and December 2021, various contacts and meetings have been held between the technical responsibles of INSERTEC and the technical responsibles of Magnesitas de Navarra (LIFE REFRACT5 project)

During the months of July & August 2021 we have conducted several repairs from minor to mayor ones in many industries. This is the pick season for installation and onsite repairs. This is a hard season as the all the jobs must be conducted in a short time and with a precise management: Getting t ...

During July 2021, Insertec RSI has conducted a new record lining in precast shapes almost complete 40t tilting type rotary furnace TTRF. In 7days the furnace has been cooled down, demolished, lined, dried and start production.

We want to associate the rotary furnace with an image of an intelligent, multi-product furnace, 100% connected to Industry 4.0, which allows us to obtain all kinds of production data in real time, foresee maintenance stoppages, scrap stock control, etc.

To standardize and unify nomenclature criteria for plastic and similar materials, we have been adopted the following definitions.

When we take a 25kg bag of CUARSIL we read, apart from the name, the granulometry and the percentages of binder it contains. The whole bag contains quartzite. But NOT all the content of the bag is SCR.

Commissioning of a 100 tonne melting furnace with a melting capacity of 10 t/h. It is a head furnace and the whole factory depends on it. It melts any scrap containing aluminium under the most severe conditions ever seen before.

In the series of short articles we will be presenting monthly in our NewsLetter, we will focus on the practical aspects associated with the demolition and construction of crucible induction furnaces lined with quartzite.

RONGTAI trusts in INSERTEC's experience by acquiring new equipment for the recycling of internal aluminium swarf waste. LAU INTELLIGENT SYSTEM lands in Mexico with MARTINREA.

Last April 22nd was World Earth Day. At Insertec, we didn't celebrate it because our commitment to the environment knows no dates. We work every day to develop solutions that, as well as responding to the needs of our clients, are also eco-responsible. In both our furnaces and refractory units, we c ...

Everyone is aware of the current problems in maritime transport, we are facing a complicated situation. This situation, according to experts and consultants, will be similar for the whole of this year. This is why you need to plan your shipments in advance.

We have developed and installing a new range of products INSESTRONG / ALUSTRONG, based on ceramic fraction & metalic fraction.

The process of obtaining the CIRCAL 75 R is a sustainable solution since it clearly contributes to the circular economy, it is the aluminium with the lowest CO2 emissions in the market. Helping our customers to achieve the objectives :SUSTAINABILITY/ COST EFFICIENCY ...

After almost 2 years of operation and 130,000 MT, the cladding has undergone minimal alterations. This result confirms that precast shapes furnace threshold elements are an excellent alternative to lining with concrete.

Thermal engineering solutions, precast shapes, new proposal for self-cast concrete…: our newsletter is now available.

The use of Precast shapes has led to increased security, greatly extended life-times and much reduced refractories costs in service

Because of ease installation, it is common practice to install tapping / gunning materials as protection for the coil of induction furnaces. Updating furnace design to include push-out systems that facilitate the removal of the lining during demolition and minimize dust generation during the process ...

Insertec has designed a manufacturing plant, assembly, installation supervision and commissioning of the automated alloy and melting system for a plant manufacturing wheels from primary liquid aluminium in Sohar, (Oman).